F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

520
Figure 302 Network diagram
Device Interface IP address Device Interface IP address
Router A S2/1 200.1.1.1/24 Router D GE0
/
1 10.1.5.1/24
GE0
/
1 10.1.2.1/24 GE0
/
2 10.1.3.2/24
GE0/2 10.1.3.1/24 Firewall GE0/1 10.1.5.2/24
GE0
/
3 10.1.4.1/24 GE0
/
2 10.1.4.2/24
GE0
/
4 10.1.1.1/24 Router E GE0
/
1 9.1.1.1/24
Router B GE0/1 10.1.1.2/24 S2/0 200.1.1.2/24
Router C GE0
/
1 10.1.2.2/24
1536BConfiguration procedure
1. Configure IP addresses for interfaces. (Details not shown.)
2. Configure the BGP confederation:
# Configure Router A.
<RouterA> system-view
[RouterA] bgp 65001
[RouterA-bgp] router-id 1.1.1.1
[RouterA-bgp] confederation id 200
[RouterA-bgp] confederation peer-as 65002 65003
[RouterA-bgp] peer 10.1.1.2 as-number 65002
[RouterA-bgp] peer 10.1.1.2 next-hop-local
[RouterA-bgp] peer 10.1.2.2 as-number 65003
[RouterA-bgp] peer 10.1.2.2 next-hop-local
[RouterA-bgp] quit
# Configure Router B.
<RouterB> system-view
[RouterB] bgp 65002
[RouterB-bgp] router-id 2.2.2.2
[RouterB-bgp] confederation id 200
[RouterB-bgp] confederation peer-as 65001 65003
[RouterB-bgp] peer 10.1.1.1 as-number 65001
[RouterB-bgp] quit
# Configure Router C.