F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

536
729BPBR and track
You can use track to monitor the output interface, default output interface, next hop, and default next hop
for PBR so that PBR can discover link failures faster. PBR takes effect when the status of the associated
track entry is positive or invalid.
For more information about track-PBR collaboration, see High Availability Configuration Guide.
190B
Configuring PBR in the Web interface
730BRecommended configuration procedure
Ste
p
Descri
p
tion
636. 2710HConfiguring a policy
a. Required.
b. Create a policy and configure the policy node.
c. By default, no policy is created.
637. 2711HApplying a policy
a. Required.
b. You can configure local PBR or interface PBR.
• Only one policy can be referenced when local PBR is enabled. Local PBR is
not configured by default.
• Only one policy can be referenced when interface PBR is enabled. Interface
PBR is not configured by default.
IMPORTANT:
Unless otherwise required, do not configure local PBR.
731BConfiguring a policy
1547BCreating a policy and a policy node
1. Select Network > Routing Management > Policy Routing from the navigation tree.
The default policy configuration page appears.
Figure 306 Policy configuration page
2. Click Add.
The page for creating a policy appears.