F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

537

Figure 307 Creating a policy

3. Create a policy and a policy node as described in 2712HTable 61.

4. Click Apply.

Table 61 Configuration items

Item Descri

tion

Policy Name

Enter a policy name.

IMPORTANT:

Any spaces entered at the beginning or end of a policy name will be ignored. A policy

name containing only spaces is considered as null.

Node Index

Enter a node index of the policy.

The node with a smaller number has a higher priority and is matched first.

Matching Mode

Select a matching mode for the node.

Minimum Length

Define an IP packet length match criterion. Set both the minimum and maximum lengths

or leave fields null at the same time.

IMPORTANT:

Leaving either of the fields blank will delete the match criterion.

Maximum Length

Matched ACL

Enter an ACL number.

Preference

Enter an IP packet preference.

There are totally eight (in the range 0 to 7) preference levels, as shown in

2713H

Table 62.

Next Hop

Enter the next hop IP address.