F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

540
Figure 310 PBR application page
3. Click Add.
The page for applying a policy appears.
Figure 311 Applying a policy
4. Enable local PBR or interface PBR as described in 2720HTable 63.
5. Click Apply.
Table 63 Configuration items
Item Descri
p
tion
Apply to
Specify the policy application mode:
• Local—Enable local PBR. Unless otherwise required, do not enable local PBR.
• Interface—Enable interface PBR. Apply the policy on a selected interface.
Policy Name Enter the name of the policy to be applied.
733BPBR configuration example
In this example, Device A is the firewall.
1549BNetwork requirements
As shown in 2721HFigure 312, configure PBR on Device A to send TCP packets received from GigabitEthernet
0/3 to the next hop 1.1.2.2 (Device B), and other packets based on the routing table.