F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

37
Figure 22 Network diagram
1088B Configuring Device A
1. Create VLAN 2, VLANs 6 through 50, and VLAN 100:
a. Select Network > VLAN > VLAN from the navigation tree.
b. Click Add.
The page as shown in
2181H Figure 23 appears.
c. Enter VLAN IDs 2, 6-50, and 100.
d. Click Apply.
Figure 23 Creating VLANs
2. Configure VLAN 100 as the PVID of GigabitEthernet 0/1 (By default, all ports are access ports
and their PVIDs are all VLAN 1.):
a. Select Network > VLAN > Port from the navigation tree.
b. Click the icon for port GigabitEthernet 0/1 in the Operation column.
The page as shown in
2182H Figure 24 appears.
c. Select the Untagged option for Member Type.
d. Enter VLAN ID 100.
e. Click Apply.
Figure 24 Configuring the PVID of GigabitEthernet 0/1
3. Configure GigabitEthernet 0/1 as a hybrid port, and assign it to VLAN 2 and VLANs 6 through 50
as an untagged member: