F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

580
Ste
p
Command Remarks
702. Configure the IGMP querier's
robustness variable.
robust-count robust-value
2 by default.
A higher robustness variable makes the
IGMP querier more robust, but results in
longer multicast group timeout time.
703. Configure the startup query
interval.
startup-query-interval
interval
By default, the startup query interval is
one-quarter of the "IGMP general query
interval."
704. Configure the startup query
count.
startup-query-count
value
By default, the startup query count is the
same as the IGMP querier's robustness
variable.
705. Configure the IGMP general
query interval.
timer query interval 60 seconds by default.
706. Configure the maximum
response time for IGMP
general queries.
max-response-time
interval
10 seconds by default.
707. Configure the IGMP
last-member query interval.
last-member-query-inter
val interval
1 second by default.
708. Configure the other querier
present interval.
timer
other-querier-present
interval
By default, the other querier present interval
is [ IGMP general query interval ] × [ IGMP
robustness variable ] + [ maximum response
time for IGMP general queries ] / 2.
To configure IGMP query and response parameters on an interface:
Ste
p
Command Remarks
709. Enter system view.
system-view N/A
710. Enter interface view.
interface interface-type
interface-number
N/A
711. Configure the IGMP
querier's robustness
variable.
igmp robust-count
robust-value
2 by default.
A higher robustness variable makes the
IGMP querier more robust, but results in
longer multicast group timeout time.
712. Configure the startup
query interval.
igmp startup-query-interval
interval
By default, the startup query interval is
one-quarter of the "IGMP general query
interval."
713. Configure the startup
query count.
igmp startup-query-count
value
By default, the startup query count is the
same as the IGMP querier's robustness
variable.
714. Configure the IGMP
general query interval.
igmp timer query interval 60 seconds by default.
715. Configure the maximum
response time for IGMP
general queries.
igmp max-response-time
interval
10 seconds by default.
716. Configure the IGMP last
member query interval.
igmp
last-member-query-interval
interval
1 second by default.