F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

594
761BRecommended configuration procedure for PIM-SM
Ste
p
Remarks
745. Globally enable multicast routing
Required.
Globally enable multicast routing after selecting Network >
Routing Management > Multicast Routing. For more information,
see "
2771H
Configuring multicast routing and forwarding."
By default, multicast routing is globally disabled.
746. 2772HConfiguring PIM interfaces
Required.
Enable PIM-SM on an interface.
After PIM-SM is enabled, a router sends hello messages
periodically to discover PIM neighbors and processes messages
from the PIM neighbors. To deploy a PIM-SM domain, enable
PIM-SM on all non-border interfaces of the routers.
By default, PIM is disabled on an interface.
747. 2773HConfiguring advanced PIM features
Optional.
• Enable the auto-RP function, which is disabled by default.
• Configure the register message checksum and calculation
method.
748. 2774HDisplaying PIM neighbor information
Optional.
You cannot configure the device as a RP, C-RP, or C-BSR in the Web interface. To do so, use the CLI. For
more information, see "
2775HConfiguring PIM-SM at the CLI."
762BRecommended configuration procedure for PIM-SSM
Step Remarks
749. Globally enable multicast routing
Required.
Globally enable multicast routing after selecting Network >
Routing Management > Multicast Routing. For more information,
see "
2776H
Configuring multicast routing and forwarding."
By default, multicast routing is globally disabled.
750. 2777HConfiguring PIM interfaces
Required.
Enable PIM-SSM on an interface.
The implementation of the SSM model is based on some subsets
of PIM-SM. Therefore, you must enable PIM-SM before
configuring PIM-SSM. When you deploy a PIM-SSM domain,
enable PIM-SM on non-border interfaces of the routers.
By default, PIM is disabled on an interface.
751. 2778HConfiguring advanced PIM features
Optional.
Configure the SSM group range. By default, the SSM group
range is 232.0.0.0/8.
752. 2779HDisplaying PIM neighbor information
Optional.