F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

595
763BConfiguring PIM interfaces
1. From the navigation tree, select Network > Routing Management > PIM.
Figure 339 PIM interfaces configuration page
2. Click the icon corresponding to a specific PIM interface.
Figure 340 Modifying the specified PIM interface
3. Select the operating mode for the interface.
If you do not specify any operating mode, no PIM modes are enabled on the interface.
4. Click Apply.
764BConfiguring advanced PIM features
1. From the navigation tree, select Network > Routing Management > PIM.
2. Click Advanced Configuration.
Figure 341 PIM advanced configuration page
3. Configure the parameters, as described in 2780HTable 66.
4. Click Apply.