F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

597
Figure 342 PIM neighbor information
Table 67 Field description
Field Descri
p
tion
Interface Name of the interface connecting to a PIM neighbor.
Neighbor address IP address of a PIM neighbor.
Uptime
Length of time for which the PIM neighbor has been up, where a
"01:02:11:32:18" value means that the neighbor has been up for 1 week, 2 days,
11 hours, 32 minutes, and 18 seconds.
Remaining lifetime
Remaining lifetime of the PIM neighbor, where a "00:02:45" value means that the
neighbor will time out in 2 minutes and 45 seconds and "never" means that the PIM
neighbor never times out.
766BPIM configuration example
In this example, Device A is the firewall.
1609BNetwork requirements
As shown in 2781HFigure 343, receivers receive VOD information through multicast. The receiver groups of
different organizations form stub networks, and one or more receiver hosts exist in each stub network. The
entire PIM domain operates in the dense mode.
Host A and Host C are multicast receivers in two stub networks N1 and N2.
IGMPv2 runs between Device A and N1 and between Device B and N2.