F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

628
Downstream interface(s) information:
Total number of downstreams: 1
1: Ethernet1/1
Protocol: pim-sm, UpTime: 00:00:42, Expires: 00:03:06
The information on Router B and Router C is similar to that on Router A.
# Display PIM routing table information on the firewall.
[Firewall] display pim routing-table
VPN-Instance: public net
Total 0 (*, G) entry; 1 (S, G) entry
(10.110.5.100, 225.1.1.0)
RP: 192.168.9.2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 00:00:42
Upstream interface: GigabitEthernet0/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet0/3
Protocol: pim-sm, UpTime: 00:00:42, Expires: 00:02:26
# Display PIM routing table information on Router D.
[RouterD] display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 0 (S, G) entry
(*, 225.1.1.0)
RP: 192.168.9.2 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:13:16
Upstream interface: Register
Upstream neighbor: 192.168.4.2
RPF prime neighbor: 192.168.4.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Pos5/2
Protocol: pim-sm, UpTime: 00:13:16, Expires: 00:03:22
1628BPIM-SM admin-scope zone configuration example
1. Network requirements
As shown in
2824HFigure 350, the receivers receive VOD information through multicast. The entire
PIM-SM domain is divided into admin-scope zone 1, admin-scope zone 2, and the global scope
zone. The firewall, Router B, and Router C are ZBRs of the three domains, respectively.
Source 1 and Source 2 send different multicast information to multicast group 239.1.1.1. Host A
receives the multicast information from Source 1 only, and Host B receives the multicast
information from Source 2 only. Source 3 sends multicast information to multicast group
224.1.1.1. Host C is a multicast receiver for this multicast group.