F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

691
Task Command Remarks
Display the IPv6 path MTU
information.
display ipv6 pathmtu [ vpn-instance
vpn-instance-name ] { ipv6-address | all | dynamic
| static } [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display socket information.
display ipv6 socket [ socktype socket-type ] [ task-id
socket-id ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display the statistics of IPv6
packets and ICMPv6 packets.
display ipv6 statistics [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display IPv6 TCP connection
statistics.
display tcp ipv6 statistics [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display IPv6 TCP connection
status information.
display tcp ipv6 status [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display the statistics of IPv6 UDP
packets.
display udp ipv6 statistics [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Clear IPv6 neighbor
information.
reset ipv6 neighbors { all | dynamic | interface
interface-type interface-number | static }
Available in user
view.
Clear the path MTU values. reset ipv6 pathmtu { all | static | dynamic}
Available in user
view.
Clear the statistics of IPv6 and
ICMPv6 packets.
reset ipv6 statistics
Available in user
view.
Clear all IPv6 TCP connection
statistics.
reset tcp ipv6 statistics
Available in user
view.
Clear the statistics of all IPv6
UDP packets.
reset udp ipv6 statistics
Available in user
view.
226B
IPv6 basics configuration example
843BNetwork requirements
As shown in 2883HFigure 363, a host, Firewall A and Firewall B are connected through Ethernet interfaces.
Configure IPv6 addresses for the interfaces and verify that they are connected.
Enable IPv6 on the host to automatically obtain an IPv6 address through IPv6 ND.
Figure 363 Network diagram
844BConfiguration procedure
1. Configure Firewall A:
# Enable IPv6.