F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

708
Ste
p
Command Descri
p
tion
997. Create a DHCPv6
address pool and enter
its view.
ipv6 dhcp pool pool-number [ vpn-instance
vpn-instance-name ]
By default, no
DHCPv6 address pool
exists.
998. Create a static binding.
static-bind address ipv6-address/addr-prefix-length
duid duid [ iaid iaid ] [ preferred-lifetime
preferred-lifetime valid-lifetime valid-lifetime ]
Use at least one step.
By default, no static
binding or dynamic
address allocation is
configured.
999. Configure dynamic
address allocation.
• Specify an IPv6 subnet for dynamic assignment:
network { network-address/prefix-length | prefix
prefix-number [ sub-prefix/sub-prefix-length ] }
[ preferred-lifetime preferred-lifetime
valid-lifetime valid-lifetime ]
• Specify a non-temporary IPv6 address range
(optional):
address range start-ipv6-address
end-ipv6-address [ preferred-lifetime
preferred-lifetime valid-lifetime valid-lifetime ]
857BConfiguring temporary IPv6 address assignment
Ste
p
Command Descri
p
tion
1000. Enter system view.
system-view
N/A
1001. Create a DHCPv6
address pool and enter
its view.
ipv6 dhcp pool pool-number
[ vpn-instance vpn-instance-name ]
By default, no DHCPv6 address
pool exists.
1002. Specify an IPv6
subnet for dynamic
assignment.
network { network-address/prefix-length
| prefix prefix-number
[ sub-prefix/sub-prefix-length ] }
[ preferred-lifetime preferred-lifetime
valid-lifetime valid-lifetime ]
By default, no IPv6 subnet is
configured for dynamic address
assignment.
1003. Specify a
temporary IPv6 address
range.
temporary address range
start-ipv6-address end-ipv6-address
[ preferred-lifetime preferred-lifetime
valid-lifetime valid-lifetime ]
By default, no temporary address
range is specified.
In the same address pool, the
temporary address range and
address range cannot overlap.
241B
Configuring network parameter assignment
In addition to IPv6 prefixes and IPv6 addresses, you can configure other configuration parameters in a
DHCPv6 address pool, such as DNS server address, client domain name, SIP server address and
domain name, self-defined options, and AFTR address. For more information about AFTR, see VPN
Configuration Guide.
Use one of the following methods to configure network parameter assignment:
• Configure configuration parameters in the DHCPv6 address pool.
• Create a DHCPv6 option group, configure configuration parameters in the group, and apply the
option group to the DHCPv6 address pool.