F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

720
Domain names:
aaa.com
SIP server addresses:
2:2::4
SIP server domain names:
bbb.com
# After a client obtains an IPv6 prefix, display IPv6 prefix binding information.
[Firewall] display ipv6 dhcp server pd-in-use all
Total number: 1
VPN instance: Public network
Prefix Type Pool Expiration time
12:34::/48 Auto(C) 1 Apr 29 2011 17:07:38
# After a client obtains an IPv6 address, display IPv6 address binding information.
[Firewall] display ipv6 dhcp server ip-in-use all
Total number: 1
VPN instance: Public network
Address Type Pool Expiration time
12:34:56::A Auto(C) 1 Apr 29 2011 17:06:58
863BDynamic IPv6 address and prefix assignment configuration
example
1712BNetwork requirements
As shown in 2901HFigure 375, Firewall A serves as a DHCPv6 server, and assigns an IPv6 prefix, DNS server
address, domain name suffix, SIP server address, and SIP server domain name to the DHCPv6 client,
Firewall B. The DNS server address is 2:2::3. The domain name suffix is aaa.com. The SIP server address
is 2:2::4, and the domain name of the SIP server is bbb.com.
With the configuration obtained from Firewall A, Firewall B serves as a DHCPv6 server and assigns IP
prefixes in the range of 12:34::/48 to 12:34:FFFF::/48 and addresses in the subnet 12:34:56::/48 to
Router A and Router B.
1713BConfiguration considerations
• To configure Firewall A:
a. Enable IPv6.
b. Enable the DHCPv6 server.
c. Create a prefix pool.
d. Create an address pool, and specify a prefix pool so that Firewall A can assign a prefix to
Firewall B.
e. Enable the DHCPv6 server on GigabitEthernet 0/1 that connects to Firewall B.
• To configure Firewall B that serves as the DHCPv6 client:
f. Enable IPv6.
g. Configure interface GigabitEthernet 0/2 to use DHCPv6 for IPv6 prefix acquisition, and
specify the prefix ID as 1 and option group ID as 1.
• To configure Firewall B that serves as the DHCPv6 server:
h. Enable the DHCPv6 server.