F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

730
254B
DHCPv6 client configuration task list
Task Remarks
2905H
Configuring address acquisition
Use either approach.
2906H
Configuring prefix acquisition
2907H
Enabling the stateless address autoconfiguration
255B
Configuring address acquisition
Ste
p
Command Remarks
1029. Enter system view. system-view N/A
1030. Enter interface view.
interface interface-type
interface-number
N/A
1031. Configure the interface to
use DHCPv6 for IP address
acquisition.
ipv6 address dhcp-alloc [ option-group
group-number | rapid-commit ] *
By default, An interface does
not use DHCPv6 for IP
address acquisition.
256B
Configuring prefix acquisition
Ste
p
Command Remarks
1032. Enter system view.
system-view
N/A
1033. Enter interface view.
interface interface-type
interface-number
N/A
1034. Configure the interface to
use DHCPv6 for IPv6 prefix
acquisition.
ipv6 dhcp client pd prefix-number
[ option-group group-number |
rapid-commit ] *
By default, the interface
does not use DHCPv6 for
IPv6 prefix acquisition.
257B
Enabling the stateless address autoconfiguration
Ste
p
Command
1035. Enter system view. system-view
1036. Enter interface view.
interface interface-type interface-number
1037. Enable IPv6 stateless address autoconfiguration.
ipv6 address auto