F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

732
[Firewall] interface gigabitethernet 0/1
[Firewall-GigabitEthernet0/1] ipv6 address 1::2/48
# Configure GigabitEthernet 0/1 to use DHCPv6 to obtain an IPv6 prefix and configuration parameters,
and enable rapid prefix assignment. With the obtained prefix and parameters, the client automatically
creates a DHCPv6 option group.
[Firewall-GigabitEthernet0/1] ipv6 dhcp client pd 1 rapid-commit option-group 1
[Firewall-GigabitEthernet0/1] quit
1718BVerifying the configuration
# Display DHCPv6 client information. The output shows that Router has obtained an IPv6 prefix and
configuration parameters.
[Firewall] display ipv6 dhcp client
GigabitEthernet0/1:
Type: Stateful client requested for prefix
State: OPEN
IAID: 0xf0019
Preferred server:
Reachable via address: FE80::200:5EFF:FE0A:2303
DUID: 00030001000fe20a0a00
Prefix: 12:34::/32
Preferred lifetime 90 sec, valid lifetime 90 sec
T1 45 sec, T2 72 sec
Will expire at Jul 18 2011 10:04:03
DNS server addresses:
2000::FF
Domain names:
example.com
SIP server addresses:
2:2::4
SIP server domain names:
bbb.com
# Disply Ipv6 prefix information.
[Firewall] display ipv6 prefix 1
Number: 1
Type : Dynamic
Prefix: 12:34::/32
Preferred lifetime 90 sec, valid lifetime 90 sec
# Display information about dynamic DHCPv6 option group 1.
[Firewall] display ipv6 dhcp option-group 1
DHCPv6 option group: 1
Type: Dynamic
DNS server addresses:
2000::FF
Domain names:
example.com
SIP server addresses:
2:2::4
SIP server domain names: