F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

746
Ste
p
Command Remarks
1045. Configure an
IPv6 static route.
• Approach 1:
ipv6 route-static ipv6-address prefix-length
{ interface-type interface-number [ next-hop-address ]
| next-hop-address | vpn-instance
d-vpn-instance-name next-hop-address } [ preference
preference-value ]
• Approach 2:
ipv6 route-static vpn-instance
s-vpn-instance-name&<1-6> ipv6-address
prefix-length { interface-type interface-number
[ next-hop-address ] | next-hop-address [ public ] |
vpn-instance d-vpn-instance-name next-hop-address }
[ preference preference-value ]
Use either approach.
By default, no IPv6
static route is
configured.
1046. Delete all IPv6
static routes,
including the default
route.
delete ipv6 [ vpn-instance vpn-instance-name ]
static-routes all
Optional.
The undo ipv6
route-static command
deletes one IPv6 static
route.
268B
Displaying and maintaining IPv6 static routes
Task Command Remarks
Display IPv6 static route
information.
display ipv6 routing-table protocol static [ inactive |
verbose ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
269B
IPv6 static routing configuration example
877BNetwork requirements
As shown in 2914HFigure 388, configure IPv6 static routes so that hosts can reach one another.
Figure 388 Network diagram