F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

756
match, the device accepts the packet. Otherwise, it discards the packet and does not establish a
neighbor relationship with the sending device.
You can configure an IPsec policy for a RIPng process or interface. The IPsec policy configured for a
process applies to all packets in the process. The IPsec policy configured on an interface applies to
packets on the interface. If an interface and its process each have an IPsec policy configured, the
interface uses its own IPsec policy.
An IPsec policy used for RIPng can only be in manual mode. For more information, see VPN
Configuration Guide.
1727BConfiguration prerequisites
Before you apply an IPsec policy for RIPng, complete following tasks:
• Create an IPsec proposal.
• Create an IPsec policy.
For more information about IPsec policy configuration, see Security Configuration Guide.
1728BConfiguration procedure
To apply an IPsec policy in a process:
Ste
p
Command Remarks
1088. Enter system view.
system-view N/A
1089. Enter RIPng view.
ripng [ process-id ] [ vpn-instance
vpn-instance-name ]
N/A
1090. Apply an IPsec policy in the
process.
enable ipsec-policy policy-name Not configured by default.
To apply an IPsec policy on an interface:
Ste
p
Command Remarks
1091. Enter system view. system-view N/A
1092. Enter interface view.
interface interface-type interface-number N/A
1093. Apply an IPsec policy
on the interface.
ripng ipsec-policy policy-name Not configured by default.
278B
Displaying and maintaining RIPng
Task Command Remarks
Display configuration information
of a RIPng process.
display ripng [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Display routes in the RIPng
database.
display ripng process-id database [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display the routing information of
a specified RIPng process.
display ripng process-id route [ | { begin |
exclude | include } regular-expression ]
Available in any view.