F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

774
Ste
p
Command Remarks
1149. Enter system view. system-view N/A
1150. Enter interface view.
interface interface-type interface-number N/A
1151. Configure a DR priority.
ospfv3 dr-priority priority [ instance instance-id ]
Optional.
Defaults to 1.
912BIgnoring MTU check for DD packets
When LSAs are few in DD packets, it is unnecessary to check the MTU in DD packets to improve
efficiency.
To ignore MTU check for DD packets:
Ste
p
Command Remarks
1152. Enter system view.
system-view N/A
1153. Enter interface view.
interface interface-type interface-number N/A
1154. Ignore MTU check for DD
packets.
ospfv3 mtu-ignore [ instance instance-id ] Not ignored by default.
913BDisabling interfaces from receiving and sending OSPFv3
packets
Follow these guidelines when you disable interfaces from receiving and sending OSPFv3 packets:
• Multiple OSPFv3 processes can disable the same interface from receiving and sending OSPFv3
packets. Using the silent-interface command disables only the interfaces associated with the current
process.
• After an OSPF interface is set to silent, direct routes of the interface can still be advertised in
Intra-Area-Prefix-LSAs through other interfaces, but other OSPFv3 packets cannot be advertised. No
neighboring relationship can be established on the interface. This feature can enhance the
adaptability of OSPFv3 networking.
To disable interfaces from receiving and sending OSPFv3 packets:
Ste
p
Command Remarks
1155. Enter system view.
system-view N/A
1156. Enter OSPFv3 view. ospfv3 [ process-id ] N/A
1157. Disable interfaces from
receiving and sending OSPFv3
packets.
silent-interface { interface-type
interface-number | all }
Not disabled by default.
914BEnabling the logging of neighbor state changes
Ste
p
Command Remarks
1158. Enter system view.
system-view
N/A