F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

799
Task Command Remarks
Display LSDB information.
display isis lsdb [ [ l1 | l2 | level-1 | level-2 ]
| [ [ lsp-id lsp-id | lsp-name lspname |
local ] | verbose ] * ] * [ process-id |
vpn-instance vpn-instance-name ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display IS-IS mesh group
information.
display isis mesh-group [ process-id |
vpn-instance vpn-instance-name ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display the mapping table
between the host name and system
ID.
display isis name-table [ process-id |
vpn-instance vpn-instance-name ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display IS-IS neighbor information.
display isis peer [ statistics | verbose ]
[ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display IPv6 IS-IS routing
information.
display isis route ipv6 [ [ level-1 | level-2 ] |
verbose ] * [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display SPF log information.
display isis spf-log [ process-id |
vpn-instance vpn-instance-name ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display the statistics of the IS-IS
process.
display isis statistics [ level-1 | level-1-2 |
level-2 ] [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Clear all IS-IS data structure
information.
reset isis all [ process-id | vpn-instance
vpn-instance-name ]
Available in user view.
Clear the IS-IS data information of
a neighbor.
reset isis peer system-id [ process-id | vpn
vpn-instance-name ]
Available in user view.
298B
IPv6 IS-IS configuration examples
924BIPv6 IS-IS basic configuration example
1754BNetwork requirements
As shown in 2958HFigure 397, Router A, Router B, Router C, and Firewall, all enabled with IPv6, reside in the
same autonomous system. Configure IPv6 IS-IS on the routers so that they can reach each other.
Router A and Router B are Level-1 routers, Router C is a Level-2 router, and Firewall is a Level-1-2 router.
Router A, Router B, and Firewall belong to area 10, and Router C is in area 20.