F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

808
931BConfiguring a description for an IPv6 peer or peer group
Ste
p
Command Remarks
1218. Enter system view.
system-view N/A
1219. Enter BGP view.
bgp as-number N/A
1220. Enter IPv6 address family
view.
ipv6-family N/A
1221. Configure a description
for an IPv6 peer or peer group.
peer { ipv6-group-name |
ipv6-address } description
description-text
Optional.
Not configured by default.
The peer group to be configured with a
description must have been created.
932BDisabling session establishment to an IPv6 peer or peer group
Ste
p
Command Remarks
1222. Enter system view. system-view N/A
1223. Enter BGP view.
bgp as-number N/A
1224. Enter IPv6 address family view.
ipv6-family N/A
1225. Disable session establishment
to an IPv6 peer or peer group.
peer { ipv6-group-name |
ipv6-address } ignore
Optional.
Not disabled by default.
933BLogging IPv6 peer or peer group state changes
Ste
p
Command Remarks
1226. Enter system view.
system-view N/A
1227. Enter BGP view.
bgp as-number N/A
1228. Enable logging of peer changes
globally.
log-peer-change
Optional.
Enabled by default.
1229. Enter IPv6 address family view.
ipv6-family N/A
1230. Enable the state change
logging for an IPv6 peer or peer
group.
peer { ipv6-group-name |
ipv6-address } log-change
Optional.
Enabled by default.
303B
Controlling route distribution and reception
This task includes routing information filtering, routing policy application, and route dampening.
934BConfiguration prerequisites
Before you configure route distribution and reception control, complete the following tasks: