F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

809
• Enable IPv6.
• Configure IPv6 BGP basic functions.
935BConfiguring IPv6 BGP route redistribution
IMPORTANT:
If the default-route imported command is not configured, using the import-route command cannot
redistribute an IGP default route.
To configure IPv6 BGP route redistribution:
Ste
p
Command Remarks
1231. Enter system view. system-view N/A
1232. Enter BGP view.
bgp as-number N/A
1233. Enter IPv6 address family view
or IPv6 BGP-VPN instance view.
ipv6-family [ vpn-instance
vpn-instance-name ]
N/A
1234. Enable default route
redistribution into the IPv6 BGP
routing table.
default-route imported
Optional.
Not enabled by default.
1235. Enable route redistribution from
another routing protocol.
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
Not enabled by default.
936BConfiguring IPv6 BGP route summarization
To reduce the routing table size on medium and large BGP networks, configure route summarization on
BGP routers. BGP supports only manual summarization of IPv6 routes.
To configure IPv6 BGP route summarization:
Ste
p
Command Remarks
1236. Enter system
view.
system-view N/A
1237. Enter BGP view. bgp as-number N/A
1238. Enter IPv6
address family view.
ipv6-family N/A
1239. Configure
manual route
summarization.
aggregate ipv6-address prefix-length [ as-set |
attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name
| suppress-policy route-policy-name ] *
Not configured by
default.
937BAdvertising a default route to an IPv6 peer or peer group
Ste
p
Command Remarks
1240. Enter system view.
system-view N/A
1241. Enter BGP view.
bgp as-number N/A