F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

810
Ste
p
Command Remarks
1242. Enter IPv6 address family
view.
ipv6-family N/A
1243. Advertise a default route to
an IPv6 peer or peer group.
peer { ipv6-group-name | ipv6-address }
default-route-advertise [ route-policy
route-policy-name ]
Not advertised by
default.
NOTE:
W
ith the peer default-route-advertise command executed, the local router advertises a default route with
itself as the next hop to the specified IPv6 peer or peer group, regardless of whether the default route is
available in the routing table.
938BConfiguring outbound route filtering
Ste
p
Command Remarks
1244. Enter system view.
system-view N/A
1245. Enter BGP view.
bgp as-number N/A
1246. Enter IPv6 address
family view or IPv6 BGP-VPN
instance view.
ipv6-family [ vpn-instance
vpn-instance-name ]
N/A
1247. Configure the filtering of
outgoing routes.
filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name } export [ protocol
process-id ]
Not configured by default.
1248. Apply a routing policy
to routes advertised to an IPv6
peer or peer group.
peer { ipv6-group-name | ipv6-address }
route-policy route-policy-name export
Not applied by default.
The IPv6 BGP-VPN instance
view does not support the
ipv6-group-name argument.
1249. Specify an IPv6 ACL to
filter routes advertised to an
IPv6 peer or peer group.
peer { ipv6-group-name | ipv6-address }
filter-policy acl6-number export
Not specified by default.
The IPv6 BGP-VPN instance
view does not support this
command.
1250. Specify an AS path list
to filter routes advertised to an
IPv6 peer or peer group.
peer { ipv6-group-name | ipv6-address }
as-path-acl as-path-acl-number export
Not specified by default.
The IPv6 BGP-VPN instance
view does not support this
command.
1251. Specify an IPv6 prefix
list to filter routes advertised to
an IPv6 peer or peer group.
peer { ipv6-group-name | ipv6-address }
ipv6-prefix ipv6-prefix-name export
Not specified by default.
The IPv6 BGP-VPN instance
view does not support this
command.