F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

814
Ste
p
Command Remarks
1279. Enable the comparison
of MED for routes from
different EBGP peers.
compare-different-as-med
Optional.
Not enabled by default.
The IPv6 BGP-VPN instance view
does not support this command.
1280. Enable the comparison
of MED for routes from each
AS.
bestroute compare-med
Optional.
Disabled by default.
The IPv6 BGP-VPN instance view
does not support this command.
1281. Enable the comparison
of MED for routes from
confederation peers.
bestroute med-confederation
Optional.
Disabled by default.
The IPv6 BGP-VPN instance view
does not support this command.
945BConfiguring the AS_PATH attribute
Ste
p
Command Remarks
1282. Enter system view.
system-view N/A
1283. Enter BGP view.
bgp as-number N/A
1284. Enter IPv6 address
family view.
ipv6-family N/A
1285. Allow the local AS
number to appear in
AS_PATH of routes from a
peer or peer group and
specify the repeat times.
peer { ipv6-group-name |
ipv6-address } allow-as-loop
[ number ]
Optional.
Not allowed by default.
1286. Specify a fake AS
number for an IPv6 peer or
peer group.
peer { ipv6-group-name |
ipv6-address } fake-as as-number
Optional.
Not specified by default.
1287. Disable IPv6 BGP from
considering the AS_PATH
during best route selection.
bestroute as-path-neglect
Optional.
Enabled by default.
1288. Configure to carry only
the public AS number in
updates sent to a peer or peer
group.
peer { ipv6-group-name |
ipv6-address } public-as-only
Optional.
By default, IPv6 BGP updates carry
private AS number.
1289. Substitute the local AS
number for the AS number of
an IPv6 peer or peer group
identified in the AS_PATH
attribute.
peer { ipv6-group-name |
ipv6-address } substitute-as
Optional.
Not substituted by default.
305B
Tuning and optimizing IPv6 BGP networks
This section describes configurations of IPv6 BGP timers, IPv6 BGP connection soft reset, and the
maximum number of load balanced routes.