F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

821
1762BCreating a mixed EBGP peer group
Ste
p
Command Remarks
1338. Enter system view. system-view N/A
1339. Enter BGP view.
bgp as-number N/A
1340. Enter IPv6 address family
view.
ipv6-family N/A
1341. Create an EBGP peer
group.
group ipv6-group-name external N/A
1342. Specify the AS number of
an IPv6 peer.
peer ipv6-address as-number as-number
Not specified by default.
1343. Add the IPv6 peer into the
peer group.
peer ipv6-address group
ipv6-group-name
Not added by default.
NOTE:
W
hen creating a mixed EBGP peer group, you must create a peer and specify its AS number, which can
be different from AS numbers of other peers; however, you cannot specify an AS number for the EBGP
peer group.
956BConfiguring IPv6 BGP community
1763BAdvertising community attribute to an IPv6 peer or peer group
Ste
p
Command Remarks
1344. Enter system view.
system-view N/A
1345. Enter BGP view.
bgp as-number N/A
1346. Enter IPv6 address family
view.
ipv6-family
N/A
1347. Advertise COMMUNITY
attribute to an IPv6 peer or peer
group.
peer { ipv6-group-name |
ipv6-address } advertise-community
Not advertised by default.
1348. Advertise extended
community attribute to an IPv6
peer or peer group.
peer { ipv6-group-name |
ipv6-address }
advertise-ext-community
Not advertised by default.
1764BApplying a routing policy to routes advertised to a peer or peer group
When configuring IPv6 BGP community, you must configure a routing policy to define the COMMUNITY
attribute, and apply the routing policy to route advertisement.
For routing policy configuration, see "Configuring routing policies."
To apply a routing policy to routes advertised to a peer or peer group:
Ste
p
Command Remarks
1349. Enter system view.
system-view N/A
1350. Enter BGP view. bgp as-number N/A