F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

842
314B
IPv6 PBR configuration task list
Task Remarks
3000H
Configuring an IPv6
policy
3001H
Creating an IPv6 node
Required.
3002H
Configuring match criteria for an IPv6 node
3003H
Defining actions for an IPv6 node
3004H
Configuring IPv6
PBR
3005H
Configuring IPv6 local PBR
Required.
Perform one of the tasks.
3006H
Configuring IPv6 interface PBR
315B
Configuring an IPv6 policy
968BCreating an IPv6 node
Ste
p
Command
1363. Enter system view.
system-view
1364. Create an IPv6 policy or policy
node and enter IPv6 policy node
view.
ipv6 policy-based-route policy-name [ deny | permit ] node
node-number
969BConfiguring match criteria for an IPv6 node
An ACL match criterion uses the specified ACL to match packets if the match mode is configured as
permit. If the specified ACL does not exist or the match mode is configured as deny, no packet can match
the criterion.
To configure match criteria for an IPv6 node:
Ste
p
Command Remarks
1365. Enter system view.
system-view N/A
1366. Enter IPv6 policy node
view.
ipv6 policy-based-route policy-name [ deny |
permit ] node node-number
N/A
1367. Configure an ACL
match criterion.
if-match acl6 acl-number Optional.
1368. Configure an IPv6
packet length match criterion.
if-match packet-length min-len max-len Optional.
970BDefining actions for an IPv6 node
Ste
p
Command Remarks
1369. Enter system view.
system-view N/A