F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

875
To configure the IPv6 SSM group range:
Ste
p
Command Remarks
1465. Enter system view.
system-view N/A
1466. Enter IPv6 PIM view. pim ipv6 N/A
1467. Configure the IPv6 SSM
group range.
ssm-policy acl6-number
Optional.
FF3x::/32 by default, here "x"
refers to any legal group scope.
332B
Configuring common IPv6 PIM features
For the configuration tasks in this section, the following rules apply:
• The configurations made in IPv6 PIM view are effective on all interfaces. The configurations made
in interface view are effective only on the current interface.
• A configuration made in interface view always has priority over the same configuration made in
IPv6 PIM view, regardless of the configuration sequence.
998BConfiguration task list
Task Remarks
3046H
Configuring an IPv6 multicast data filter Optional.
3047H
Configuring a hello message filter Optional.
3048H
Configuring IPv6 PIM hello options Optional.
3049H
Setting the prune delay timer Optional.
3050H
Configuring common IPv6 PIM timers Optional.
3051H
Configuring join/prune message sizes Optional.
999BConfiguration prerequisites
Before you configure common IPv6 PIM features, complete the following tasks:
• Enable IPv6 forwarding and configure an IPv6 unicast routing protocol so that all devices in the
domain are interoperable at the network layer.
• Configure IPv6 PIM-DM (or IPv6 PIM-SM or IPv6 PIM-SSM).
• Determine the IPv6 ACL rule for filtering IPv6 multicast data.
• Determine the IPv6 ACL rule defining a legal source address range for hello messages.
• Determine the priority for DR election (global value/interface level value).
• Determine the IPv6 PIM neighbor timeout timer (global value/interface value).
• Determine the prune message delay (global value/interface level value).
• Determine the prune override interval (global value/interface level value).
• Determine the prune delay.
• Determine the hello interval (global value/interface level value).