F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

892
[Firewall-GigabitEthernet0/3] quit
[Firewall] interface gigabitethernet 0/4
[Firewall-GigabitEthernet0/4] multicast ipv6 boundary scope 4
[Firewall-GigabitEthernet0/4] quit
# On Router B, configure Ethernet 1/2 and POS 5/2 as the boundary of IPv6 admin-scope zone
2.
<RouterB> system-view
[RouterB] interface ethernet 1/2
[RouterB-Ethernet1/2] multicast ipv6 boundary scope 4
[RouterB-Ethernet1/2] quit
[RouterB] interface pos 5/2
[RouterB-Pos5/2] multicast ipv6 boundary scope 4
[RouterB-Pos5/2] quit
# On Router C, configure POS 5/1 as the boundary of admin-scope zone 2.
<RouterC> system-view
[RouterC] interface pos 5/1
[RouterC-Pos5/1] multicast ipv6 boundary scope 4
[RouterC-Pos5/1] quit
4. Configure C-BSRs and C-RPs:
# On the firewall, configure the service scope of RP advertisements and configure GigabitEthernet
0/2 as a C-BSR and C-RP of admin-scope zone 1.
[Firewall] pim ipv6
[Firewall-pim6] c-bsr scope 4
[Firewall-pim6] c-bsr 1002::2
[Firewall-pim6] c-rp 1002::2 scope 4
[Firewall-pim6] quit
# On Router C, configure the service scope of RP advertisements and configure Serial 2/1 as a
C-BSR and C-RP of admin-scope zone 2.
[RouterC] pim ipv6
[RouterC-pim6] c-bsr scope 4
[RouterC-pim6] c-bsr 3002::2
[RouterC-pim6] c-rp 3002::2 scope 4
[RouterC-pim6] quit
# On Router E, configure Serial 2/1 as a C-BSR and C-RP in the global scope zone.
<RouterE> system-view
[RouterE] pim ipv6
[RouterE-pim6] c-bsr scope global
[RouterE-pim6] c-bsr 8001::1
[RouterE-pim6] c-rp 8001::1
[RouterE-pim6] quit
1815BVerifying the configuration
# Display information about the BSR and locally configured C-RP on the firewall.
[Firewall] display pim ipv6 bsr-info
Elected BSR Address: 8001::1
Priority: 64
Hash mask length: 126