F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

908
Task Remarks
3060H
Configuring an IPv6 multicast group filter Optional.
3061H
Setting the maximum number of IPv6 multicast
groups that an interface can join
Optional.
3062H
Adjusting MLD performance
3063H
Configuring Router-Alert option handling methods Optional.
3064H
Configuring MLD query and response parameters Optional.
3065H
Enabling MLD fast-leave processing Optional.
3066H
Enabling the MLD host tracking function Optional.
3067H
Configuring MLD SSM mapping
3068H
Enabling MLD SSM mapping Optional.
3069H
Configuring MLD SSM mapping entries Optional.
3070H
Configuring MLD proxying
3071H
Enabling MLD proxying Optional.
3072H
Configuring IPv6 multicast forwarding on a
downstream interface
Optional.
338B
Configuring basic MLD functions
This section describes how to configure basic MLD functions.
1015BConfiguration prerequisites
Before you configure basic MLD functions, complete the following tasks:
• Enable IPv6 forwarding and configure an IPv6 unicast routing protocol so that all devices in the
domain can be interoperable at the network layer.
• Configure IPv6 PIM-DM or IPv6 PIM-SM.
• Determine the MLD version.
• Determine the IPv6 multicast group address and IPv6 multicast source address for static group
member configuration.
• Determine the ACL rule for IPv6 multicast group filtering.
• Determine the maximum number of IPv6 multicast groups that an interface can join.
1016BEnabling MLD
Enable MLD on the interface on which IPv6 multicast group memberships will be created and
maintained.
To enable MLD:
Ste
p
Command Remarks
1510. Enter system view. system-view N/A
1511. Enable IPv6 multicast routing.
multicast ipv6 routing-enable Disable by default.
1512. Enter interface view.
interface interface-type interface-number N/A
1513. Enable MLD. mld enable Disabled by default.