F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

922
# On Router A, enable IPv6 multicast routing globally, and enable IPv6 PIM-SM on each interface.
<RouterA> system-view
[RouterA] multicast ipv6 routing-enable
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] pim ipv6 sm
[RouterA-Ethernet1/1] quit
[RouterA] interface ethernet 1/2
[RouterA-Ethernet1/2] pim ipv6 sm
[RouterA-Ethernet1/2] quit
[RouterA] interface ethernet 1/3
[RouterA-Ethernet1/3] pim ipv6 sm
[RouterA-Ethernet1/3] quit
# Enable IPv6 multicast routing and IPv6 PIM-SM on Router B and Router C in the same way.
(Details not shown.)
3. Configure C-BSR and C-RP interfaces on the firewall.
[Firewall] pim ipv6
[Firewall-pim6] c-bsr 1003::2
[Firewall-pim6] c-rp 1003::2
[Firewall-pim6] quit
4. Configure the IPv6 SSM group range:
# Configure the IPv6 SSM group range FF3E::/64 on the firewall.
[Firewall] acl ipv6 number 2000
[Firewall-acl6-basic-2000] rule permit source ff3e:: 64
[Firewall-acl6-basic-2000] quit
[Firewall] pim ipv6
[Firewall-pim6] ssm-policy 2000
[Firewall-pim6] quit
# Configure the IPv6 SSM group range on Router A, Router B and Router C in the same way.
(Details not shown.)
5. Configure MLD SSM mappings on the firewall.
[Firewall] mld
[Firewall-mld] ssm-mapping ff3e:: 64 1001::1
[Firewall-mld] ssm-mapping ff3e:: 64 3001::1
[Firewall-mld] quit
1848BVerifying the configuration
# Display MLD SSM mapping information for IPv6 multicast group FF3E::101 on the firewall.
[Firewall] display mld ssm-mapping ff3e::101
Group: FF3E::101
Source list:
1001::1
3001::1
# Display information about the IPv6 multicast groups created based on the configured MLD SSM
mappings on the firewall.
[Firewall] display mld ssm-mapping group
Total 1 MLD SSM-mapping Group(s).
Interface group report information