F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100
933
Ste
p
Command
Remarks
1593. Define match
criteria for IPv4 routes.
• Match IPv4 routing information
specified in the ACL:
if-match acl acl-number
• Match IPv4 routing information
specified in the IP prefix list:
if-match ip-prefix ip-prefix-name
• Match IPv4 routing information
whose next hop or source is
specified in the ACL or IP prefix list:
if-match ip { next-hop |
route-source } { acl acl-number |
ip-prefix ip-prefix-name }
Optional.
Not configured by default.
1594. Match IPv6 routing
information whose next
hop or source is
specified in the ACL or IP
prefix list.
if-match ipv6 { address | next-hop |
route-source } { acl acl-number |
prefix-list ipv6-prefix-name }
Optional.
Not configured by default.
Support for the if-match ipv6
command depends on the device
model.
1595. Match BGP routing
information whose
AS_PATH attribute is
specified in the AS path
lists.
if-match as-path
AS-PATH-number&<1-16>
Optional.
Not configured by default.
Support for the if-match as-path
command depends on the device
model.
1596. Match BGP routing
information whose
COMMUNITY attribute
is specified in the
community lists.
if-match community
{ { basic-community-list-number |
comm-list-name } [ whole-match ] |
adv-community-list-number }&<1-16>
Optional.
Not configured by default.
Support for the if-match community
command depends on the device
model.
1597. Match BGP routing
information whose
extended community
attribute is specified in
the extended community
lists.
if-match extcommunity
ext-comm-list-number&<1-16>
Optional.
Not configured by default.
1598. Match routes
having the specified
cost.
if-match cost value
Optional.
Not configured by default.
1599. Match routing
information having
specified output
interfaces.
if-match interface { interface-type
interface-number }&<1-16>
Optional.
Not configured by default.
1600. Match routing
information having MPLS
labels.
if-match mpls-label
Optional.
Not configured by default.