F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

934
Ste
p
Command Remarks
1601. Match routing
information having the
specified route type.
if-match route-type { external-type1 |
external-type1or2 | external-type2 |
internal | is-is-level-1 | is-is-level-2 |
nssa-external-type1 |
nssa-external-type1or2 |
nssa-external-type2 } *
Optional.
Not configured by default.
Support for keywords is-is-level-1
and is-is-level-2 depends on the
device model.
1602. Match RIP, OSPF,
and IS-IS routing
information having the
specified tag value
if-match tag value
Optional.
Not configured by default.
Support for the value argument
depends on the device model.
1046BConfiguring apply clauses
Follow these guidelines when you configure apply clauses:
• The difference between IPv4 and IPv6 apply clauses is the command for setting the next hop for
routing information.
• The apply ip-address next-hop and apply ipv6 next-hop commands do not apply to redistributed
IPv4 and IPv6 routes.
To configure apply clauses for a routing policy:
Ste
p
Command Remarks
1603. Enter system view.
system-view N/A
1604. Enter routing policy view.
route-policy route-policy-name
{ deny | permit } node node-number
Not created by default.
1605. Set the AS_PATH attribute
for BGP routes.
apply as-path as-number&<1-10>
[ replace ]
Optional.
Not set by default.
Support for the apply as-path
command depends on the
device model.
1606. Delete the COMMUNITY
attribute of BGP routing
information using the
community list.
apply comm-list { comm-list-number |
comm-list-name } delete
Optional.
Not configured by default.
Support for the apply comm-list
command depends on the
device model.
1607. Set the COMMUNITY
attribute for BGP routes.
apply community { none | additive |
{ community-number&<1-16> |
aa:nn&<1-16> | internet |
no-advertise | no-export |
no-export-subconfed } * [ additive ] }
Optional.
Not set by default.
Support for the apply
community command depends
on the device model.
1608. Set a cost for routing
information.
apply cost [ + | - ] value
Optional.
Not set by default.