F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

948
For more information about PKI commands and the public-key local create rsa command, see VPN
Command Reference. For more information about HTTPS, see Getting Started Guide.
356B
HTTPS login configuration example using the
default certificate
1057BNetwork requirements
Users can access and control the firewall through Web. To prevent illegal users from accessing and
controlling the firewall and improve the firewall management security, configure the firewall as the HTTPS
server and use the factory default certificate for the firewall.
Configure the firewall
Figure 418 Network diagram
1058BConfiguration procedure
1876BConfiguring the firewall in the Web interface
1. Configure the HTTPS service:
a. Log in to the Web interface of the firewall.
b. Navigate to Device Management > Service Management.
c. Select Enable HTTPS service, and use the default certificate and the default port number.
d. Click Apply.
Figure 419 Configuring the HTTPS service
2. Configure a local user:
a. Navigate to User > Local User.
b. Add a local user, configuring the user name as admin1, user privilege level as Management,
service type as Web and Telnet, and password as admin1.
c. Click Apply.