F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

91
Views
System view
Default command level
2: System level
Parameters
unicom: Specifies the unicom format.
china-telecom: Specifies the china-telecom format.
china-unicom-nat444: Specifies the china-unicom-nat444 format.
Usage guidelines
System information sent to the log host can be in HP, unicom, china-telecom, or china-unicom-nat444
format. The china-telecom and china-unicom-nat444 formats are available only for NAT444. For more
information about system information formats, see System Management and Maintenance Configuration
Guide. For information about NAT444, see NAT and ALG Configuration Guide.
The following matrix shows support for the china-telecom, china-unicom-nat444 arguments on different
firewalls and UTM devices:
Hardware china-telecom, china-unicom-nat444
F1000-A-EI/F1000-S-EI No
F1000-E Yes
F5000 No
Firewall module Yes
U200-A No
U200-S No
Examples
# Set the format of system information sent to the log host as unicom.
<Sysname> system-view
[Sysname] info-center format unicom
# Set the format of system information sent to the log host as china-telecom.
<Sysname> system-view
[Sysname] info-center format china-telecom
# Set the format of system information sent to the log host as china-unicom-nat444.
<Sysname> system-view
[Sysname] info-center format china-unicom-nat444
info-center logbuffer
Use info-center logbuffer to configure information output to the log buffer.
Use undo info-center logbuffer to disable information output to the log buffer.
Syntax
info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ] *