F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

92
undo info-center logbuffer [ channel | size ]
Default
The system outputs information to the log buffer through channel 4 (logbuffer).
Views
System view
Default command level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about configuring a channel name, see info-center channel name.
buffersize: Specifies the maximum number of log messages that can be stored in the log buffer.
The following matrix shows the value range and default values for the buffersize argument on different
firewalls and UTM devices:
Hardware Value ran
g
e Default value
F1000-A-EI/F1000-S-EI 0 to 1024 512
F1000-E 0 to 65535 65535
F5000 0 to 65535 65535
Firewall module
12500/10522 Enhanced FW:0 to 1024
Others: 0 to 65535
12500/10522 Enhanced FW: 512
Others: 65535
U200-A 0 to 1024 512
U200-S 0 to 1024 512
Usage guidelines
The info-center logbuffer command takes effect only after the information center has been enabled with
the info-center enable command.
Examples
# Output system information to the log buffer through channel 4, and set the log buffer size to 50.
<Sysname> system-view
[Sysname] info-center logbuffer size 50
info-center logfile enable
Use info-center logfile enable to enable the log file feature.
Use undo info-center logfile enable to disable the log file feature.
Syntax
info-center logfile enable
undo info-center logfile enable