F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

93
Default
The log file feature is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
The following matrix shows the info-center logfile enable command and hardware compatibility:
Hardware info-center lo
g
file enable
F1000-A-EI/F1000-S-EI No
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A No
U200-S No
Examples
# Enable the log file feature.
<Sysname> system-view
[Sysname] info-center logfile enable
info-center logfile frequency
Use info-center logfile frequency to configure the interval for saving system information to the log file.
Use undo info-center logfile frequency to restore the default interval.
Syntax
info-center logfile frequency freq-sec
undo info-center logfile frequency
Default
The default saving interval is 86400 seconds.
Views
System view
Default command level
2: System level
Parameters
freq-sec: Specifies the saving interval in the range of 1 to 86400 seconds.