F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

94
Usage guidelines
The following matrix shows the info-center logfile frequency command and firewalls and UTM devices
compatibility:
Hardware info-center lo
g
file fre
q
uenc
y
F1000-A-EI/F1000-S-EI No
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A No
U200-S No
Examples
# Configure the interval for saving system information to the log file as 60000 seconds.
<Sysname> system-view
[Sysname] info-center logfile frequency 60000
info-center logfile overwrite-protection
Syntax
info-center logfile overwrite-protection
undo info-center logfile overwrite-protection
View
System view
Default Level
2: System level
Parameters
None
Description
Use the info-center logfile overwrite-protection command to enable the overwrite-protection of the log
file. New logs cannot be written from beginning of the log file while the storage space is not enough.
Use the undo info-center logfile overwrite-protection command to disable the overwrite-protection of the
log file.
By default, new logs can be written from beginning of the log file while the storage space is not enough.
Examples
# Enable the log file overwrite-protection function.
<Sysname> system-view
[Sysname] info-center logfile overwrite-protection
info-center logfile size-quota
Use info-center logfile size-quota to set the maximum storage space reserved for a log file.