F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

101
info-center security-logfile frequency
Use info-center security-logfile frequency to configure the interval for saving security logs to the security
log file.
Use undo info-center security-logfile frequency to restore the default interval.
Syntax
info-center security-logfile frequency freq-sec
undo info-center security-logfile frequency
Default
The default saving interval is 600 seconds.
Views
System view
Default command level
2: System level
Parameters
freq-sec: Specifies the security log file saving interval in the range of 10 to 86400 seconds.
Examples
# Save security logs to the security log file every 600 seconds.
<Sysname> system-view
[Sysname] info-center security-logfile frequency 600
Related commands
info-center security-logfile enable
info-center security-logfile size-quota
Use info-center security-logfile size-quota to set the maximum storage space reserved for the security log
file.
Use undo info-center security-logfile size-quota to restore the default.
Syntax
info-center security-logfile size-quota size
undo info-center security-logfile size-quota
Default
The storage space reserved for the security log file is 1 MB.
Views
System view
Default command level
2: System level
Parameters
size: Specifies the maximum storage space reserved for the security log file, in the range of 1 to 10 MB.