F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

105
Output
destination
Source
modules
Lo
g
Tra
p
Debu
g
Enabled/d
isabled
Severity
Enabled/d
isabled
Severity
Enabled/d
isabled
Severity
Trap buffer
All
supported
modules
Disabled
Informati
onal
Enabled
Informati
onal
Disabled Debug
Log buffer
All
supported
modules
Enabled
Informati
onal
Disabled Debug Disabled Debug
SNMP
module
All
supported
modules
Disabled Debug Enabled
Informati
onal
Disabled Debug
Log file
All
supported
modules
Enabled Debug Enabled Debug Disabled Debug
Examples
# Output VLAN module's trap information with a severity level of at least emergency to the channel
console. All other system information cannot be output to this channel.
<Sysname> system-view
[Sysname] info-center source default channel console debug state off log state off trap
state off
[Sysname] info-center source vlan channel console trap level emergencies state on
info-center synchronous
Use info-center synchronous to enable synchronous information output.
Use undo info-center synchronous to disable synchronous information output.
Syntax
info-center synchronous
undo info-center synchronous
Default
Synchronous information output is disabled.
Views
System view
Default command level
2: System level
Usage guidelines
If system information is output before you enter information at a command line prompt, the system does
not display the command line prompt after the system information output.
If system information is output when you are entering some interactive information (non Y/N confirmation
information), the system displays your input in a new line after the system information output.