F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

116
Table 23 Command output
Field Descri
p
tion
flow Configuration and statistics about flow logs.
No userlog export is enabled
Flow logs are not sent to the log server. It may be because exporting
flow logs to the log server is not configured, or flow logs are sent to
the information center.
Export Version 1 logs to log server Export flow log packets of version 1.0 to the log server.
Source address of exported logs
Source IP address of the flow logging packets (this field will not be
displayed if the source IP address is not configured).
Address of log server Address of the log server, including IP address and port number.
VPN-instance
VPN instance name of the VPN to which the flow logging server
belongs. (VPN instance name can be specified only when the log
server is specified by an IPv4 address.)
Total logs/UDP packets exported
Total number of flow logs exported and total number of the UDP
packets carrying these flow logs (a UDP packet may carry multiple
flow logs).
Logs in buffer Total number of flow logs in the cache.
Related commands
reset userlog flow export
reset userlog flow export
Use reset userlog flow export to clear flow log statistics.
Syntax
reset userlog flow export
Views
User view
Default command level
2: System level
Examples
# Clear flow log statistics.
<Sysname> reset userlog flow export
Related commands
display userlog export
reset userlog flow logbuffer
Use reset userlog flow logbuffer to clear flow logs in the cache.
Syntax
reset userlog flow logbuffer