F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

120
Use undo userlog flow export version to restore the default.
Syntax
userlog flow export version version-number
undo userlog flow export version
Default
Flow logging version is 1.0.
Views
System view
Default command level
2: System level
Parameters
version-number: Specifies the flow logging version number, 1 or 3.
Usage guidelines
If you configure the flow logging version multiple times, only the most recent configuration takes effect.
Examples
# Set the flow logging version to 3.0.
<Sysname> system-view
[Sysname] userlog flow export version 3
userlog flow syslog
Use userlog flow syslog to export flow logs to the information center.
Use undo userlog flow syslog to restore the default.
Syntax
userlog flow syslog
undo userlog flow syslog
Default
Flow logs are exported to the log server.
Views
System view
Default command level
2: System level
Usage guidelines
The two export approaches of flow logs are mutually exclusive. If you configure two approaches
simultaneously, the system automatically exports the flow logs to the information center.
Exporting flow logs to the information center occupies device storage space. Use this export approach
only if there are a small amount of logs.
Examples
# Export flow logs to the information center.