F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

124
Table 25 Command output
Field Descri
p
tion
clock source IP address of the clock source.
clock stratum
Stratum level of the clock source, which determines the clock precision. The value is
in the range of 1 to 16. The clock precision decreases from stratum 1 to stratum 16.
A stratum 1 clock has the highest precision, and a stratum 16 clock is not
synchronized.
clock status
Status of the clock source corresponding to this session:
• configured—The session was created by a configuration command.
• dynamic—This session is established dynamically.
• master—The clock source is the primary reference source of the current system.
• selected—The clock source has survived the clock selection algorithm.
• candidate—The clock source is the candidate reference source.
• sane—The clock source has passed the sane authentication.
• insane—The clock source has failed the sane authentication.
• valid—The clock source is valid, which means the clock source meet the following
requirements: it has passed the authentication and is being synchronized, its
stratum level is valid, and its root delay and root dispersion values are within their
ranges.
• invalid—The clock source is invalid.
• unsynced—The clock source has not been synchronized or the value of the
stratum level is invalid.
reference clock ID
Reference clock ID of the clock source:
• If the reference clock is the local clock, the value of this field is related to the
stratum level of the clock source:
{ When the stratum level of the clock source is 0 or 1, this field is LOCL.
{ When the stratum level of the clock source has another value, this field is the
IP address of the local clock.
• If the reference clock is the clock of another device on the network, the value of
this field is the IP address of that device.
local mode
Operation mode of the local device:
• unspec—The mode is unspecified.
• active—Active mode.
• passive—Passive mode.
• client—Client mode.
• server—Server mode.
• bdcast—Broadcast server mode.
• control—Control query mode.
• private—Private message mode.
local poll
Poll interval of the local device, in seconds. The value displayed is a power of 2. For
example, if the displayed value is 6, the poll interval of the local device is 2
6
, or 64
seconds.