F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

127
Table 26 Command output
Field Descri
p
tion
Clock status
Status of the system clock:
• Synchronized—The system clock has been synchronized.
• Unsynchronized—The system clock has not been synchronized.
Clock stratum Stratum level of the system clock.
Reference clock ID
When the system clock is synchronized to a remote time server, this field indicates the
address of the remote time server. When the system clock is synchronized to a local
reference source, this field indicates the address of the local clock source:
• When the local clock has a stratum level of 1, the value of this field is LOCL.
• When the stratum of the local clock has another value, the value of this field is the
IP address of the local clock.
Nominal frequency Nominal frequency of the local system hardware clock, in Hz.
Actual frequency Actual frequency of the local system hardware clock, in Hz.
Clock precision Precision of the system clock.
Clock offset Offset of the system clock relative to the reference source, in milliseconds.
Root delay Roundtrip delay from the local device to the primary reference source, in milliseconds.
Root dispersion
Maximum error of the system clock relative to the primary reference source, in
milliseconds.
Peer dispersion Maximum error of the system clock relative to the reference source, in milliseconds.
Reference time Reference timestamp.
display ntp-service trace
Use display ntp-service trace to display brief information about each NTP server from the local device
back to the primary reference source.
Syntax
display ntp-service trace [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.