F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

175
Examples
# Configure the local engine ID as 12 3456789 A.
<Sysname> system-view
[Sysname] snmp-agent local-engineid 123456789A
Related commands
snmp-agent usm-user
snmp-agent log
Use snmp-agent log to enable SNMP logging.
Use undo snmp-agent log to restore the default.
Syntax
snmp-agent log { all | get-operation | set-operation }
undo snmp-agent log { all | get-operation | set-operation }
Default
SNMP logging is disabled.
Views
System view
Default command level
3: Manage level
Parameters
all: Enables logging SNMP GET and SET operations.
get-operation: Enables logging SNMP GET operations.
set-operation: Enables logging SNMP SET operations.
Usage guidelines
Use SNMP logging to record the SNMP operations performed on the SNMP agent for auditing NMS
behaviors. The SNMP agent sends log data to the information center. You can configure the information
center to output the data to a specific destination as needed.
Examples
# Enable logging SNMP GET operations.
<Sysname> system-view
[Sysname] snmp-agent log get-operation
# Enable logging SNMP SET operations.
<Sysname> system-view
[Sysname] snmp-agent log set-operation
snmp-agent mib-view
Use snmp-agent mib-view to create or update a MIB view.
Use undo snmp-agent mib-view to delete a MIB view.