F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

179
undo snmp-agent target-host trap address udp-domain { ip-address | ipv6 ipv6-address } params
securityname security-string [ vpn-instance vpn-instance-name ]
In FIPS mode:
snmp-agent target-host trap address udp-domain { ip-address | ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string v3
[ authentication | privacy ]
undo snmp-agent target-host trap address udp-domain { ip-address | ipv6 ipv6-address } params
securityname security-string [ vpn-instance vpn-instance-name ]
Views
System view
Default command level
3: Manage level
Parameters
trap: Specifies a target host for receiving the traps sent by the device.
address: Specifies the IP address of the target host.
udp-domain: Specifies UDP as the transport protocol.
ip-address: Specifies the IPv4 address or name of the target host. The host name is a string of 1 to 255
characters.
ipv6 ipv6-address: Specifies the IPv6 address of the target host.
The following matrix shows the ipv6 ipv6-address option and firewalls and UTM compatibility:
Hardware O
p
tion com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
udp-port port-number: Specifies the UDP port for receiving SNMP traps. The default UDP port is 162.
vpn-instance vpn-instance-name: Specifies the VPN to which the target host belongs, where
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the target host is on the public
network, do not specify this option. This combination is applicable only in a network supporting IPv4.
params securityname security-string: Specifies the authentication parameter. The security-string
argument specifies an SNMPv1 or SNMPv2c community name or an SNMPv3 username, a string of 1
to 32 characters.
v1: Specifies SNMPv1.
v2c: Specifies SNMPv2c.
v3: Specifies SNMPv3.
• authentication: Specifies the security model to be authentication without privacy. You must specify
the authentication key when you create the SNMPv3 user.