F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

181
electedbsrlostelection | interfaceelection | invalidjoinprune | invalidregister | neighborloss |
rpmappingchange ] * | standard [ authentication | coldstart | linkdown | linkup | warmstart ]* |
system | vrrp [ authfailure | newmaster ] ]
Default
By default, all supported traps are enabled except for the default-route trap.
Views
System view
Default command level
3: Manage level
Parameters
bfd: Enables SNMP traps for the BFD module.
The following matrix shows the bfd keyword and firewalls and UTM compatibility:
Hardware Ke
y
word com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
Firewall module No
U200-A No
U200-S No
bgp: Enables SNMP traps for the BGP module.
The following matrix shows the bgp keyword and firewalls and UTM compatibility:
Hardware Ke
y
word com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
configuration: Enables configuration traps.
default-route: Enables default route traps, which are sent when default routes are deleted.
flash: Enables Flash-related SNMP traps.
ospf: Enables SNMP traps for the OSPF module.
• process-id: OSPF process ID, in the range 1 to 65535.
• ifauthfail: Interface authentication failure traps.
• ifcfgerror: Interface configuration error traps.