F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

182
• ifrxbadpkt: Traps for receiving incorrect packets.
• ifstatechange: Interface state change traps.
• iftxretransmit: Traps for packet receiving and forwarding events on interfaces.
• lsdbapproachoverflow: Traps for approaching LSDB overflow.
• lsdboverflow: LSDB overflow traps.
• maxagelsa: Traps for LSA max age.
• nbrstatechange: Traps for neighbor state change.
• originatelsa: Traps for local LSA generation.
• vifcfgerror: Traps for virtual interface configuration error.
• virifauthfail: Traps for virtual interface authentication failure.
• virifrxbadpkt: Traps for virtual interface receiving error packets.
• virifstatechange: Traps for virtual interface state changes.
• viriftxretransmit: Traps for virtual interface receiving and forwarding packets.
• virnbrstatechange: Traps for neighbor state change of the virtual interface.
pim: Enables SNMP traps for the PIM module.
• candidatebsrwinelection: Traps for the winning of a candidate-bootstrap router (C-BSR) in
bootstrap router (BSR) election.
• electedbsrlostelection: Traps for losing the BSR election.
• interfaceelection: Traps for the election of a new DR or DF on an interface.
• invalidjoinprune: Traps for receiving invalid join or prune packets.
• invalidregister: Traps for receiving invalid registration packets.
• neighborloss: Traps for the lost of a neighbor.
• rpmappingchange: Traps for the change of the current RP-set.
standard: Standard traps.
• authentication: Enables sending authentication failure traps in the event of authentication failure.
• coldstart: Sends coldstart traps when the device restarts.
• linkdown
: Globally enables sending linkDown traps when the link of a port goes down.
• link
up: Globally enables sending linkUp traps when the link of a port goes up.
• warmstart: Sends warmstart traps when the SNMP restarts.
system: Enables system event (private MIB) traps.
vrrp: Enables traps for the VRRP module.
• authfailure: VRRP authentication failure traps.
• newmaster: VRRP newmaster traps, which are sent when the device becomes the master.
Usage guidelines
After you globally enable a trap function for a module, whether the module generates traps also depends
on the configuration of the module. For more information, see the sections for each module.
To generate linkUp or linkDown traps when the link state of an interface changes, you must enable the
linkUp or linkDown trap function globally by using the snmp-agent trap enable [ standard [ linkdown |
linkup ] * ] command and on the interface by using the enable snmp trap updown command.