F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

205
display sftp client source
Use display sftp client source to display the source IP address or source interface set for the SFTP client.
Syntax
display sftp client source [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither source IP address nor source interface is specified for the SFTP client, the system displays the
message "Neither source IP address nor source interface was specified for the SFTP client."
Examples
# Display the source IP address set for the SFTP client.
<Sysname> display sftp client source
The source IP address you specified is 192.168.0.1
Related commands
sftp client source
display ssh client source
Use display ssh client source to display the source IP address or source interface information set for
Stelnet client.
Syntax
display ssh client source [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide
begin: Displays the first line that matches the specified regular expression and all lines that follow.