F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

228
VD configuration commands
The following matrix shows the feature and hardware compatibility:
Hardware VD com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
allocate interface
Use allocate interface to assign a Layer 3 interface to a VD.
Use undo allocate interface to reclaim a Layer 3 interface assigned to a VD.
Syntax
allocate interface interface-type interface-number
undo allocate interface interface-type interface-number
Default
All Layer 3 interfaces belong to the default VD. A non-default VD can use any Layer 2 interface in the
system but can use no Layer 3 interface.
Views
VD view
Default command level
2: System level
Parameters
interface-type interface-number: Specifies a Layer 3 interface by its type and number.
Usage guidelines
A Layer 3 interface can only belong to one VD. Assigning a Layer 3 interface to a second VD equals
reclaiming the interface and assigning it to the second VD.
After being reclaimed, a Layer 3 interface belongs to the default VD.
Interfaces that are not assigned to non-default VDs belong to the default VD.
Examples
# Assign port GigabitEthernet 0/1 to VD test.
<Sysname> system-view
[Sysname] vd test id 2