F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

231
Syntax
session max-entries max-entries
undo session max-entries
Default
The maximum number of concurrent sessions for the default VD equals the maximum number of sessions
supported by the physical device, and the maximum number of concurrent sessions for a non-default VD
equals the maximum number of sessions specified for the VD by using the limit-resource session
max-entries command.
Views
System view, VD system view
Default command level
2: System level
Parameters
max-entries: Specifies the maximum number of concurrent sessions that can be set up on a VD.
The following matrix shows the value range for the max-entries argument on different firewalls and UTM
devices:
Hardware Value ran
g
e
F1000-A-EI/F1000-S-EI 1 to 1200000
F1000-E 1 to 500000
F5000 0 to 4000000
Firewall module 1 to 1100000
U200-A 0 to 100000
U200-S 1 to 16000
Usage guidelines
To set the maximum number of concurrent sessions for the default VD, use this command in system view.
To set the maximum number of concurrent sessions for a non-default VD, log in to the VD and use this
command in VD system view.
The maximum number of concurrent sessions for a VD cannot exceed the maximum number of sessions
specified for the VD.
Examples
# Set the maximum number of concurrent sessions to 2000 for the default VD.
<Sysname> system-view
[Sysname] session max-entries 2000
# Set the maximum number of concurrent sessions to 3000 for VD test.
<Sysname> system-view
[Sysname] switchto vd test
[Sysname-vsys-test] session max-entries 3000
Related commands
• vd