F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

232
• switchto
switchto
Use switchto to log in to a non-default VD from the system view of the default VD and enter VD system
view.
Syntax
switchto vd vd-name
Views
System view
Default command level
2: System level
Parameters
vd-name: Specifies the VD name, a case-insensitive string of 1 to 20 characters.
Usage guidelines
To return from a VD system view to the system view of the default VD, use the quit command.
Examples
# Enter the system view of existing VD vdtest.
<Sysname> system-view
[Sysname] switchto vd test
[Sysname-vsys-test]
# Return to system view.
<Sysname> system-view
[Sysname] switchto vd test
[Sysname-vsys-test] quit
[Sysname]
vd
Use vd to create a non-default VD and enter VD view. If the VD already exists, you enter the VD view
directly.
Use undo vd to delete a VD.
Syntax
vd vd-name [ id vd-id ]
undo vd vd-name [ id vd-id ]
Default
There is a default VD with the name Root and the ID 1.
Views
System view
Default command level
2: System level